CUBOGRIT K
Continuous CBN band saw blade
Application
- hardened high speed steels (HSS), case-hardening steels
- high alloy tool steels > 55 HRC
- iron powder coated materials, hard cast iron, stellite
- small-sized materials
Benefits
- no chipping on workpiece edges
- only minor finishing work due to the excellent quality of the cutting surface
Features
- continuous layer of CBN on the edge of the band saw blade
- blade body made of alloy hardened steel
CUBOGRIT K — Continuous CBN band saw blade
WIKUS is expanding its portfolio of coated band saw blades with a new product, CUBOGRIT, which uses cubic boron nitride (CBN) as the cutting material. Cubic boron nitride is the second hardest material known and its properties include high hardness and strength as well as heat and chemical resistance. These properties make CUBOGRIT band saw blades ideal for reliable processing of hardened ferrous materials and hard alloys as well as alloys produced by 3D printing. With CUBOGRIT, even the hardest materials up to 70 HRC can now be cut economically.
Minimum requirements on the machine side:
- cutting speed over 1200 m/min
- high stability of the machine
- high drive motor torque
In order to achieve the optimal and efficient result for your cutting application, we will be happy to discuss with you possible combinations of grit, band saw blade dimensions as well as operating and general conditions. Our specialists will be happy to contact you.
CUBOGRIT K is also available with a special stainless steel body as CUBOGRIT K VA.
This version offers the following benefits:
- possibility of cooling with pure water
- no corrosion during prolonged machine downtime
#780 CUBOGRIT K
| Dimensions | Grain coarseness | |||
|---|---|---|---|---|
| width x thickness | 602 | 252 | 126 | 91 |
| 10 x 0.50 | B | B | B | B |
| 13 x 0.50 | B | B | B | B |
| 13 x 0.65 | B | B | B | B |
| 16 x 0.50 | B | B | B | B |
| 20 x 0.50 | B | B | B | B |
| 20 x 0.80 | B | B | B | B |
| 27 x 0.50 | B | B | B | B |
| 27 x 0.70 | B | B | B | B |
| 27 x 0.90 | B | B | B | B |
| 34 x 1.10 | B | B | B | B |
| 41 x 0.50 | B | B | B | B |
| 41 x 0.80 | B | B | B | B |
| 41 x 1.30 | B | B | B | B |
| 50 x 0.90 | B | B | B | B |
| 54 x 1.10 | B | B | B | B |
| 67 x 0.70 | B | B | B | B |
| 80 x 0.90 | B | B | B | B |
| 80 x 1.10 | B | B | B | B |
| 100 x 0.90 | B | B | B | B |
| 100 x 1.10 | B | B | B | B |
| Cutting length in solid material (mm): | 20 - 50 | 5 - 30 | 0 - 25 | 0 - 20 |
Overview of materials
Hardened high speed steel (HSS)
Case-hardened steels (and components)
High-alloy tool steels (> 55 HRC)
Iron-based powder coatings
Chilled castings
Stellite
