FUTURA NE RS
Modified geometry for less material loss in non-ferrous metals
Trapezoid tooth (T)
Solid materials
Dimension
41 x 1.30 - 80 x 1.60 mm
Application
- cutting of aluminium ingots, production of aluminium plates
Benefits
- very high productivity due to smaller chip volume
- less material loss ensures more accurate cutting of ingots
- only minor finishing work due to the perfect quality of the cutting surface
Features
- special grinding to narrow the cutting channel
- ground trapezoidal teeth with positive rake angle
- optimum tooth geometry for higher performance and better cutting surface
FUTURA NE RS — Modified geometry for less material loss in non-ferrous metals
While retaining all the key features of the FUTURA NE type - i.e. the robust body, suitably selected cutting edge material, positive tooth rake angle and the tightest cutting edge tolerances - we also add narrow cutting technology for less material loss with the RS geometry.
In addition to its high performance and reliability, the FUTURA NE RS also offers greater economy and a lower volume of scrap for disposal. It is particularly suitable for continuous operations on fully automated lines, where it has the ability to save additional costs in the context of the entire production process.
#649 FUTURA NE RS
| Dimensions | Number of teeth per inch | |||
|---|---|---|---|---|
| width x thickness | 1.4 - 2 | 1 - 1.4 | 0.85 - 1.15 | 0.7 - 1 |
| 41 x 1.30 | T | |||
| 54 x 1.10 | T | |||
| 54 x 1.30 | T | |||
| 54 x 1.60 | T | T | ||
| 80 x 1.60 | T | |||
| Cutting length in solid material (mm): | 290 - 550 | 500 - 1000 | 700 - 1400 | 900 - 2000 |
Overview of materials
Solid
Aluminium
Aluminium alloys
Non-ferrous metals